Stop Dragging the Hose: What a New Sprinkler System Really Takes
Wondering what it costs to put in a real sprinkler system? Not sure if your yard needs a basic setup or something bigger?
Tired of spending your weekends hauling a hose back and forth?
We’ve done the math, and without a system, you spend an average of 9 days a year watering your lawn by hand.
For the homeowners Simmons Landscape & Irrigation works with in Perrysburg, that’s a lot of time you could be getting back.
In this post, you’ll learn what irrigation installation costs by system size, the factors that drive price, how to pick the right system, and what our installation process looks like.
By the end, you’ll know exactly what to budget and what to expect when you hand the watering over for good.
What Does Irrigation Installation Cost in Perrysburg?
A professionally installed in-ground irrigation system in the Perrysburg area runs from $6,900 to $25,000, depending on the size of your yard, your watering needs, and the features you add.
A basic system for a roughly 4,000-square-foot lawn starts around $6,900, while a large property over 12,000 square feet can reach $25,000.
These are averages, so we always give you an exact quote after an on-site assessment of your yard.
Installation Cost by System Size
The size of your lawn is the biggest factor in the price, because larger yards need more zones and sprinkler heads (which we break down by type in our zoning guide) and more labor.
Here’s how the typical investment breaks down by system size, along with how long each one takes us to install:
| System Size | Yard Size | Starting Price | Install Timeline |
|---|---|---|---|
| Basic | ~4,000 sq. ft. | $6,900 | 3 days |
| Medium | ~12,000 sq. ft. | $12,000 – $14,000 | 4 – 7 days |
| Large | 12,000+ sq. ft. | $16,000 – $25,000 | 1 – 2 weeks |
Each price is a starting point, and your final price depends on your yard’s square footage, specific needs, and any extra features you choose to include.
What Drives Your Installation Price
Two yards the same size can land at very different prices, and a handful of factors explain why.
Knowing them ahead of time helps you plan a system that fits both your lawn and your budget:
- Yard footage, since more square footage means more pipe, more sprinkler heads, and more labor.
- Your yard’s needs, because thirsty grass, gardens, and flower beds often call for extra zones or drip lines.
- Soil and trenching: on denser ground like clay, we explain how to plan around it, which takes more time and effort to dig through.
- Our Northwest Ohio winters mean your lines have to be buried deep enough underground to withstand freezing temperatures.
- Add-on features like smart controllers and sensors that raise the upfront cost but save you water and money later.
Every one of these shapes the custom design we build for your property, which is why a real quote always starts with an in-person visit to your yard.
Choosing the Right System for Your Yard
The type of system you choose affects both how your lawn looks and how much you’ll spend.
Most homeowners start by choosing between an in-ground system and an above-ground setup, which we compare side by side here, then decide on any specialty options from there.
In-Ground vs. Above-Ground
An in-ground system hides pipes underground for a clean, lasting look, while an above-ground setup costs less but stays exposed and wears out faster.
| Feature | Above-Ground | In-Ground |
|---|---|---|
| Cost | $425 – $625 | $6,900 – $25,000 |
| Installation | DIY-friendly | Professional |
| Durability | Prone to damage | Long-lasting |
| Look | Visible hoses | Hidden pipes |
For a lawn you want looking its best for years, an in-ground system is almost always the better long-term choice.
Drip Zones and Smart Add-Ons
Beyond the main system, a few additions make your watering smarter and reduce waste.
Drip irrigation, which we price out for local yards in our drip system cost guide, sends water straight to the roots of gardens and beds, and these upgrades pay off over time:
- Wi-Fi smart controllers ($150 to $2,000+), and we help you pick one in our controller comparison, which adjust watering to the weather and can trim your water bill by up to 30%.
- Rain sensors ($20 to $75) that pause watering when it rains.
- Soil sensors ($30 to $350) that water based on real moisture levels.
- A backflow prevention valve ($210 to $4,000), required by most municipalities to protect your drinking water.
We’ll help you decide which of these actually earn their place on your property.
How We Design and Install Your System
Getting a new system in the ground is a simple, three-step process on your end.
From the first call to the day your lawn waters itself, here’s what working with us looks like:
- Get in touch. Give us a call or fill out our contact form, tell us your vision for your yard, and we’ll schedule an on-site assessment.
- Design and installation. We come to your property to assess your watering needs, then design and automate a system that delivers the right amount of water to every zone.
- Enjoy your lawn. Your system takes over watering duty, and you finally get your time back.
Most installs run from about 3 days for a basic system to 1 to 2 weeks for a large property, and we give you that timeline up front so there are no surprises.
Should You DIY or Hire a Pro?
An above-ground setup is simple enough to handle yourself, but an in-ground system is a different story.
Putting one in calls for hydraulic calculations, trenching, system calibration, and a working knowledge of local codes, and a mistake in any of those leads to inefficient watering or damage down the road.
When we install a system across Perrysburg, Maumee, and Sylvania, we use modern techniques that don’t turn your yard into a war zone, and we handle the design, the permits, and the backflow setup for you.
You get a system built right the first time, backed by people who have been doing this in Northwest Ohio for over a century.
For most homeowners, that peace of mind is well worth leaving the in-ground work to a professional.
Your Greenest Lawn Starts With Simmons Landscape & Irrigation
Designing and installing an irrigation system that fits your exact yard takes certified pros, the right equipment, and decades of local know-how, and that’s what we bring to every project. We measure your watering needs on-site, design the system zone by zone, and install it without tearing up your lawn.
Start with a free on-site assessment so we can map your yard and hand you an exact quote instead of a guess. Fill out our contact form today or give us a call, and we’ll design a system that finally gets you off lawn-watering duty.
